|
MODEL |
Inf-C
1000 |
Inf-C
2000 |
Inf-C
3000 |
|
INPUT |
| ||
|
Capacity
(VA) |
1000
VA |
2000
VA |
3000
VA |
|
Voltage |
220
/ 230 / 240 VAC± 25% (adjustible from DIP
switches on UPS) | ||
|
Frequency |
50
or 60 Hz ± 5% | ||
|
OUTPUT |
| ||
|
Power
Factor |
0.6 | ||
|
Voltage
(On mains) |
220
/ 230 / 240 VAC ± 12% | ||
|
Voltage
(On battery) |
220
/ 230 / 240 VAC +3%, -10% | ||
|
Frequency
(On battery) |
50
or 60 Hz ± 0,5% | ||
|
Wave
From |
Sine
Wave, THD < 3% | ||
|
Voltage
Regulation |
AVR
automatically increase output voltage 15% above input voltage if -9% to
-25% of nominal | ||
|
AVR
decrease output voltage 15% below input voltage if +9% to +25% of
nominal | |||
|
Transfer
Time |
4
ms. | ||
|
Overload |
UPS
automatically shuts down if overload exceeds 110% of nominal at 10min. (AC
mode) and if overload exceeds 100% of nominal at 10 sec. (Battery
mode) | ||
|
Outlet |
3
pcs IEC & 2pcs Schuko
Outlets | ||
|
BATTERY |
| ||
|
Type |
Maintenance-free
lead acid batteries | ||
|
Recharge
Time (hour) |
2
to 4 Hours 90% | ||
|
Voltage |
24Vdc |
48Vdc | |
|
Quantity |
2x12V
7Ah |
4x12V
7Ah |
4x12V
9Ah |
|
Back
Up Time |
5-30
minutes (depending on computer load) | ||
|
Protection |
Automatic
self-test & discharge protection, replace battery
indicator | ||
|
DISPLAY |
| ||
|
LED |
Utility
Normal, Back up, UPS Fault and Battery
Condition | ||
|
LCD |
Load
Level, Battery Level, Bypass, AVR, Battery
Low-Replace-Fault, | ||
|
UPS
Fault, Overload | |||
|
ALARMS |
| ||
|
Alarms |
Line
Failure, Battery Low, Overload and Fault | ||
|
PROTECTION |
| ||
|
|
Spike
Protection (320 joule, 2ms), overload protection, short circuit
protection | ||
|
COMMUNICATION |
| ||
|
Interface |
RS232
standard | ||
|
(Communication
Ports) | |||
|
Software |
standard | ||
|
ENVIRONMENT |
| ||
|
Audible
Noise |
<
40 dBA (1m from
surface) |
<
45 dBA (1m from
surface) | |
|
Protection
Class |
IP20 | ||
|
PHYSICAL |
| ||
|
Net
Weight (kg) |
15,5 |
23 |
27 |
|
Dimension
WxDxH (mm) |
175x370x247 |
175x427x247 | |
|
STANDARDS |
| ||
|
Standards |
EN
62040-1-1 (safety), EN 62040-2
(EMC) | ||